Macurco CM-E1 Carbon Monoxide CO Detector

Macurco GD2A Combustible Gas Detector The GD-2A is an all electronic detector of heating type gases, propane and methane (natural and bottle), designed for use alone or for connection to alarm control panels. It can operate on 12 to 24 VDC power from standby or interruptible panel power, or be powered separately. The attractive two part plastic case allows the GD-2A to be installed over a four inch square or double gang electrical box, providing a near flush mount. Six inch long pigtail leads are provided for connections to the control panel or other devices. Further specifications include: SIZE: 4 ½ X 5 X 1 ½ inches VOLTAGE: 12 to 24 VAC or VDC CURRENT (non-alarm): 60 ma @ 12 VDC, 30 ma @ 24 VDC CURRENT (in alarm): 83 ma @ 12 VDC, 42 ma @ 24 VDC COLOR: White SENSOR MAINTENANCE: Not required ALARM RELAY RATING: 0.25 Amps,...

System Sensor CO1224T Carbon Monoxide Detector The System Sensor CO1224T is a great little unit for keeping you and your family safe from the dangers of carbon monoxide poisoning. The CO1224T is wired to the main panel and installed on the wall of your home or business and will detect any quantity of CO gas in the enivronment for up to 6 years.This model has a Real Test feature that will allow you to test the detector with a can of canned CO to make sure that it is working properly when you first install it. Specifications Electrical Specifications Operating Voltage 12/24 VDCAudible Signal 85 dB in alarmStandby Current 20 mAAlarm Current 40 mA (75 mA test)Alarm Contact Ratings 0.5 A @ 30 VDCTrouble Contact Ratings 0.5 A @ 30 VDC Physical Specifications Size: CO1224T Length: 5.1 in, Width: 3.3 in, Height: 1.3 inCO1224TR Diameter: 6 in, Height: 1.3 inApproximate...

System Sensor CO1224TR Carbon Monoxide Detector The CO1224TR is a hardwired carbon monoxide detector that can be used with any hardwired alarm system. These should be placed near any appliance that uses gas and most often near bedrooms as well for early detection.  The CO1224 has a 10 year end-of-life timer that will let you know when it needs replacing. This also features the RealTest feature that will let you do a real time test using canned CO. The CO1224TR can be used on systems that operate on either 12 or 24 volts. This is a low current draw device and draws 20 mA in standby and 40 mA in alarm.  This can be mounted on the wall or the ceiling depending on your application and it has a built-in piezo sounder that will issue an 85 dB tone when the CO detector senses carbon monoxide. The CO1224TR measures 6.0 inches...