Alarm.com Connected Car Service For $6.50/month NO CONTRACT
Alarm.com Connected Car Service For $6.50/month with no contract. Cancel anytime.
The Connected Car Service add-on is for use with the Alarm.com Car Connector. This allows you to connect your or a family member's vehicle to your Alarm.com interactive app. By using this service you can track usage of the car, gas mileage, and GPS location. The connected car service can even read engine trouble conditions if the vehicle supports this through its OBD-II port.
This add-on service is great for new drivers or even older family members that may need to be monitored while driving. Cars built after 1996 with a viable OBD-II connection can use this service, though depending on the model of the vehicle some features may not be available. The vehicle must provide the information, such as fuel levels, to the OBD-II port for the Car Connector to read it. This cannot be used as a stand-alone service, so you must have an active Alarm.com Interactive account before it can be used.
Related Products
-
{"id":9517736657216,"title":"Alarm.com ADC-CC100-BX Car Connector","handle":"alarm-com-adc-cc100-car-connector","description":"\u003ch2\u003eAlarm.com ADC-CC100 Car Connector\u003c\/h2\u003e\n\u003cp\u003eThe ADC-CC100 is Alarm.com's newest Car Connector and is a direct replacement for the ADC-3035L-AT Car Connector. While the ADC-3035L units will still be supported by Alarm.com, the newer CC100 provides a few extra features that better integrate the units with Alarm.com's other features. In addition, Alarm.com has dropped a new service package related to Car Connectors called Connected Fleet, which pairs well with the CC100's release. By utilizing either the Connected Car, or Connected Fleet service, the Alarm.com CC100 can provide safety, maintenance support, and supervision to vehicles for either residential or commercial applications, respectively. \u003c\/p\u003e\n\u003cp\u003eOne of the most prominent new features of the ADC-CC100 is the ability to trigger video recording rules in the event that unexpected vehicle movement is detected along with other automated features based on location. This can be very handy, especially for businesses with a fleet of vehicles stationed in a parking lot. When Alarm.com cameras are used in conjunction with the Car Connectors, you'll always know if a vehicle has been moved when it shouldn't have. In addition, all of the standard features are still present including accurate GPS location, fuel level readings, diagnostic code readings, and accelerometer readings. The GPS tracking is accurate within 2 meters or closer when in ideal conditions providing trip information via the in-app map. Fuel-level readings are sent to the app as well, while also providing the option to set a low fuel threshold which will send a notification. Diagnostic code readings when the check engine light comes on will provide you with some information regarding the code so that you can quickly and accurately get the problem fixed. Along with the accelerometer tracking vehicle driving habits, the CC100 provides all you will need to properly monitor a vehicle. \u003c\/p\u003e\n\u003cp\u003eAlarm.com Car Connectors requires the use of either the Alarm.com Connected Car service or Connected Fleet Service. \u003c\/p\u003e\n\u003cp\u003eCar Connectors must be connected via an OBDII port, which is only available on vehicles manufactured after 1996. Fuel level readings may not be available for vehicles older than 2008. \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"ADC CC100 install manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/Car_Connector_ADC-CC100_-_Installation_Guide.pdf?v=1722887161\"\u003eADC-CC100 Installation guide\u003c\/a\u003e\u003cbr\u003e\u003ca title=\"ADC CC100 data sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC-CC100_Munic_Datasheet_v1.pdf?v=1722887162\"\u003eADC-CC100 Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\u003cp\u003e- Cellular Technology: LTE Cat M1, GSM 1900 MHz\u003cbr\u003e- OBD-II Interface: CAN ISO-15765-2\/15765-4, ISO 9141-2\/ISO 14230 (KWP 2000), SAE J1850 PWM, SAE J1850 VPW\u003cbr\u003e- Positioning: Integrated GPS\u003cbr\u003e- Accelerometer: Built-in, triple-axis\u003cbr\u003e- Status LEDs: Tricolor LED\u003cbr\u003e- Certifications: FCC, IC, PTCRB\u003cbr\u003e- Operating Voltage: 8 - 18V\u003cbr\u003e- Power Consumption: 850 µA @ 12V (idle with modem off)\u003cbr\u003e- Internal Battery: 450 mAh\u003cbr\u003e- Operating Temperature: -22°F to 149°F (-30°C to 65°C) (without battery)\u003cbr\u003e- Dimensions (H x W x D): 2.4 x 1.1 x 2.0” (61 x 27 x 50 mm)\u003c\/p\u003e\n\u003c!----\u003e","published_at":"2024-10-14T17:54:27-04:00","created_at":"2024-08-02T13:45:46-04:00","vendor":"Alarm.com","type":"GPS Trackers","tags":["ADC","ADC car connector","alarm.com ADC-cc100","alarm.com cc100","Car connector","connected car","connected fleet","Els PW 28397","GPS"],"price":16295,"price_min":16295,"price_max":16295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":49475371368768,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ADC-CC100-BX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alarm.com ADC-CC100-BX Car Connector","public_title":null,"options":["Default Title"],"price":16295,"weight":907,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"ADC-CC100-BX","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/alarmcom-adc-cc100-bx-car-connector-827467.jpg?v=1728975303"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/alarmcom-adc-cc100-bx-car-connector-827467.jpg?v=1728975303","options":["Title"],"media":[{"alt":"Alarm.com ADC - CC100 - BX Car Connector - AlarmSystemStore.com","id":38542502691136,"position":1,"preview_image":{"aspect_ratio":1.0,"height":550,"width":550,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/alarmcom-adc-cc100-bx-car-connector-827467.jpg?v=1728975303"},"aspect_ratio":1.0,"height":550,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/alarmcom-adc-cc100-bx-car-connector-827467.jpg?v=1728975303","width":550}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eAlarm.com ADC-CC100 Car Connector\u003c\/h2\u003e\n\u003cp\u003eThe ADC-CC100 is Alarm.com's newest Car Connector and is a direct replacement for the ADC-3035L-AT Car Connector. While the ADC-3035L units will still be supported by Alarm.com, the newer CC100 provides a few extra features that better integrate the units with Alarm.com's other features. In addition, Alarm.com has dropped a new service package related to Car Connectors called Connected Fleet, which pairs well with the CC100's release. By utilizing either the Connected Car, or Connected Fleet service, the Alarm.com CC100 can provide safety, maintenance support, and supervision to vehicles for either residential or commercial applications, respectively. \u003c\/p\u003e\n\u003cp\u003eOne of the most prominent new features of the ADC-CC100 is the ability to trigger video recording rules in the event that unexpected vehicle movement is detected along with other automated features based on location. This can be very handy, especially for businesses with a fleet of vehicles stationed in a parking lot. When Alarm.com cameras are used in conjunction with the Car Connectors, you'll always know if a vehicle has been moved when it shouldn't have. In addition, all of the standard features are still present including accurate GPS location, fuel level readings, diagnostic code readings, and accelerometer readings. The GPS tracking is accurate within 2 meters or closer when in ideal conditions providing trip information via the in-app map. Fuel-level readings are sent to the app as well, while also providing the option to set a low fuel threshold which will send a notification. Diagnostic code readings when the check engine light comes on will provide you with some information regarding the code so that you can quickly and accurately get the problem fixed. Along with the accelerometer tracking vehicle driving habits, the CC100 provides all you will need to properly monitor a vehicle. \u003c\/p\u003e\n\u003cp\u003eAlarm.com Car Connectors requires the use of either the Alarm.com Connected Car service or Connected Fleet Service. \u003c\/p\u003e\n\u003cp\u003eCar Connectors must be connected via an OBDII port, which is only available on vehicles manufactured after 1996. Fuel level readings may not be available for vehicles older than 2008. \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"ADC CC100 install manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/Car_Connector_ADC-CC100_-_Installation_Guide.pdf?v=1722887161\"\u003eADC-CC100 Installation guide\u003c\/a\u003e\u003cbr\u003e\u003ca title=\"ADC CC100 data sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC-CC100_Munic_Datasheet_v1.pdf?v=1722887162\"\u003eADC-CC100 Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\u003cp\u003e- Cellular Technology: LTE Cat M1, GSM 1900 MHz\u003cbr\u003e- OBD-II Interface: CAN ISO-15765-2\/15765-4, ISO 9141-2\/ISO 14230 (KWP 2000), SAE J1850 PWM, SAE J1850 VPW\u003cbr\u003e- Positioning: Integrated GPS\u003cbr\u003e- Accelerometer: Built-in, triple-axis\u003cbr\u003e- Status LEDs: Tricolor LED\u003cbr\u003e- Certifications: FCC, IC, PTCRB\u003cbr\u003e- Operating Voltage: 8 - 18V\u003cbr\u003e- Power Consumption: 850 µA @ 12V (idle with modem off)\u003cbr\u003e- Internal Battery: 450 mAh\u003cbr\u003e- Operating Temperature: -22°F to 149°F (-30°C to 65°C) (without battery)\u003cbr\u003e- Dimensions (H x W x D): 2.4 x 1.1 x 2.0” (61 x 27 x 50 mm)\u003c\/p\u003e\n\u003c!----\u003e"}
-
{"id":9517736657216,"title":"Alarm.com ADC-CC100-BX Car Connector","handle":"alarm-com-adc-cc100-car-connector","description":"\u003ch2\u003eAlarm.com ADC-CC100 Car Connector\u003c\/h2\u003e\n\u003cp\u003eThe ADC-CC100 is Alarm.com's newest Car Connector and is a direct replacement for the ADC-3035L-AT Car Connector. While the ADC-3035L units will still be supported by Alarm.com, the newer CC100 provides a few extra features that better integrate the units with Alarm.com's other features. In addition, Alarm.com has dropped a new service package related to Car Connectors called Connected Fleet, which pairs well with the CC100's release. By utilizing either the Connected Car, or Connected Fleet service, the Alarm.com CC100 can provide safety, maintenance support, and supervision to vehicles for either residential or commercial applications, respectively. \u003c\/p\u003e\n\u003cp\u003eOne of the most prominent new features of the ADC-CC100 is the ability to trigger video recording rules in the event that unexpected vehicle movement is detected along with other automated features based on location. This can be very handy, especially for businesses with a fleet of vehicles stationed in a parking lot. When Alarm.com cameras are used in conjunction with the Car Connectors, you'll always know if a vehicle has been moved when it shouldn't have. In addition, all of the standard features are still present including accurate GPS location, fuel level readings, diagnostic code readings, and accelerometer readings. The GPS tracking is accurate within 2 meters or closer when in ideal conditions providing trip information via the in-app map. Fuel-level readings are sent to the app as well, while also providing the option to set a low fuel threshold which will send a notification. Diagnostic code readings when the check engine light comes on will provide you with some information regarding the code so that you can quickly and accurately get the problem fixed. Along with the accelerometer tracking vehicle driving habits, the CC100 provides all you will need to properly monitor a vehicle. \u003c\/p\u003e\n\u003cp\u003eAlarm.com Car Connectors requires the use of either the Alarm.com Connected Car service or Connected Fleet Service. \u003c\/p\u003e\n\u003cp\u003eCar Connectors must be connected via an OBDII port, which is only available on vehicles manufactured after 1996. Fuel level readings may not be available for vehicles older than 2008. \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"ADC CC100 install manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/Car_Connector_ADC-CC100_-_Installation_Guide.pdf?v=1722887161\"\u003eADC-CC100 Installation guide\u003c\/a\u003e\u003cbr\u003e\u003ca title=\"ADC CC100 data sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC-CC100_Munic_Datasheet_v1.pdf?v=1722887162\"\u003eADC-CC100 Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\u003cp\u003e- Cellular Technology: LTE Cat M1, GSM 1900 MHz\u003cbr\u003e- OBD-II Interface: CAN ISO-15765-2\/15765-4, ISO 9141-2\/ISO 14230 (KWP 2000), SAE J1850 PWM, SAE J1850 VPW\u003cbr\u003e- Positioning: Integrated GPS\u003cbr\u003e- Accelerometer: Built-in, triple-axis\u003cbr\u003e- Status LEDs: Tricolor LED\u003cbr\u003e- Certifications: FCC, IC, PTCRB\u003cbr\u003e- Operating Voltage: 8 - 18V\u003cbr\u003e- Power Consumption: 850 µA @ 12V (idle with modem off)\u003cbr\u003e- Internal Battery: 450 mAh\u003cbr\u003e- Operating Temperature: -22°F to 149°F (-30°C to 65°C) (without battery)\u003cbr\u003e- Dimensions (H x W x D): 2.4 x 1.1 x 2.0” (61 x 27 x 50 mm)\u003c\/p\u003e\n\u003c!----\u003e","published_at":"2024-10-14T17:54:27-04:00","created_at":"2024-08-02T13:45:46-04:00","vendor":"Alarm.com","type":"GPS Trackers","tags":["ADC","ADC car connector","alarm.com ADC-cc100","alarm.com cc100","Car connector","connected car","connected fleet","Els PW 28397","GPS"],"price":16295,"price_min":16295,"price_max":16295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":49475371368768,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ADC-CC100-BX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alarm.com ADC-CC100-BX Car Connector","public_title":null,"options":["Default Title"],"price":16295,"weight":907,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"ADC-CC100-BX","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/alarmcom-adc-cc100-bx-car-connector-827467.jpg?v=1728975303"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/alarmcom-adc-cc100-bx-car-connector-827467.jpg?v=1728975303","options":["Title"],"media":[{"alt":"Alarm.com ADC - CC100 - BX Car Connector - AlarmSystemStore.com","id":38542502691136,"position":1,"preview_image":{"aspect_ratio":1.0,"height":550,"width":550,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/alarmcom-adc-cc100-bx-car-connector-827467.jpg?v=1728975303"},"aspect_ratio":1.0,"height":550,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/alarmcom-adc-cc100-bx-car-connector-827467.jpg?v=1728975303","width":550}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eAlarm.com ADC-CC100 Car Connector\u003c\/h2\u003e\n\u003cp\u003eThe ADC-CC100 is Alarm.com's newest Car Connector and is a direct replacement for the ADC-3035L-AT Car Connector. While the ADC-3035L units will still be supported by Alarm.com, the newer CC100 provides a few extra features that better integrate the units with Alarm.com's other features. In addition, Alarm.com has dropped a new service package related to Car Connectors called Connected Fleet, which pairs well with the CC100's release. By utilizing either the Connected Car, or Connected Fleet service, the Alarm.com CC100 can provide safety, maintenance support, and supervision to vehicles for either residential or commercial applications, respectively. \u003c\/p\u003e\n\u003cp\u003eOne of the most prominent new features of the ADC-CC100 is the ability to trigger video recording rules in the event that unexpected vehicle movement is detected along with other automated features based on location. This can be very handy, especially for businesses with a fleet of vehicles stationed in a parking lot. When Alarm.com cameras are used in conjunction with the Car Connectors, you'll always know if a vehicle has been moved when it shouldn't have. In addition, all of the standard features are still present including accurate GPS location, fuel level readings, diagnostic code readings, and accelerometer readings. The GPS tracking is accurate within 2 meters or closer when in ideal conditions providing trip information via the in-app map. Fuel-level readings are sent to the app as well, while also providing the option to set a low fuel threshold which will send a notification. Diagnostic code readings when the check engine light comes on will provide you with some information regarding the code so that you can quickly and accurately get the problem fixed. Along with the accelerometer tracking vehicle driving habits, the CC100 provides all you will need to properly monitor a vehicle. \u003c\/p\u003e\n\u003cp\u003eAlarm.com Car Connectors requires the use of either the Alarm.com Connected Car service or Connected Fleet Service. \u003c\/p\u003e\n\u003cp\u003eCar Connectors must be connected via an OBDII port, which is only available on vehicles manufactured after 1996. Fuel level readings may not be available for vehicles older than 2008. \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"ADC CC100 install manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/Car_Connector_ADC-CC100_-_Installation_Guide.pdf?v=1722887161\"\u003eADC-CC100 Installation guide\u003c\/a\u003e\u003cbr\u003e\u003ca title=\"ADC CC100 data sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC-CC100_Munic_Datasheet_v1.pdf?v=1722887162\"\u003eADC-CC100 Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\u003cp\u003e- Cellular Technology: LTE Cat M1, GSM 1900 MHz\u003cbr\u003e- OBD-II Interface: CAN ISO-15765-2\/15765-4, ISO 9141-2\/ISO 14230 (KWP 2000), SAE J1850 PWM, SAE J1850 VPW\u003cbr\u003e- Positioning: Integrated GPS\u003cbr\u003e- Accelerometer: Built-in, triple-axis\u003cbr\u003e- Status LEDs: Tricolor LED\u003cbr\u003e- Certifications: FCC, IC, PTCRB\u003cbr\u003e- Operating Voltage: 8 - 18V\u003cbr\u003e- Power Consumption: 850 µA @ 12V (idle with modem off)\u003cbr\u003e- Internal Battery: 450 mAh\u003cbr\u003e- Operating Temperature: -22°F to 149°F (-30°C to 65°C) (without battery)\u003cbr\u003e- Dimensions (H x W x D): 2.4 x 1.1 x 2.0” (61 x 27 x 50 mm)\u003c\/p\u003e\n\u003c!----\u003e"}