AlarmSystemStore.com BBB Business Review
Buy With Confidence Seal, AlarmSystemStore

Honeywell Ademco 4204 Relay Board

$96.00

Quick Overview
In Stock
Add to Wishlist

Honeywell Ademco 4204 Relay Board

Ademco 4204 Relay Board allows you to add additional relay outputs to any installation. The 4204 relays are connected to the Control/Communicator via the control's console wiring.

You can use this relay board to control additional strobes, strobes, or anything else that you would like to have controlled by the alarm panel. It also features a tamper feature that sets off a trouble when someone tries to compromise it. It adds four programmable relays to your Ademco alarm system and fits inside the panel itself if it is not over-crowded already.

Specifications:

Physical Dimesions:
Width: 6-1/2" (169mm)
Height: 4-1/4" (108mm)
Depth: 1-1/4" (32mm)

Electrical:
Voltage: 12VDC (From control's remote console connection points)
Current: 15mA Standby plus 40 mA per active relay

4204 Installation manual
4204 Data sheet

QUESTIONS & ANSWERS

Ask a Question
  • What address does the relay module gets from a vista 20p? Since I have a communicator and 2 zone expanders with address 7 and 8

    The 4204 relay modules use addresses 12-15 on the Vista 20P. 

  • Can the relays be set to close when the alarm is set in Away? I'd like to use them to power up interior security cameras when I'm gone.

    Yes, the relays have many triggers with away mode being one of them. If you check the Vista programming manual pg 28 details all the options for triggering relays.

  • Is this compatible with a Vista 5140XM?

    I am unfamiliar with the 5140XM as it appears to be an older model that we've never carried. I would doubt it's compatibility with this. I can only say for certain it is compatible with the 15P, 20P and 21IP models.