Customer Service
Alarm.com ADC-SEM300-PS-VZ-M System Enhancement Module For DSC PowerSeries (Verizon)
Add to Wishlist
ADC-SEM300-PS-VZ-M System Enhancement Module For DSC PowerSeries (Verizon)
What you'll get:
1 - ADC-SEM300-PS-VZ-M
1 - Antenna
1 - Red Power Wire for Battery Connection
3 - Screws
3 - Wall anchors
The ADC-SEM310-PS-VZ-M is a dual path Verizon cellular and Broadband internet communicator for DSC PC1616, PC1832, and PC1864 alarm systems that are version 4.2 or higher. This will send signal over the 4G Verizon Network and has an optional hookup, via ethernet cable, for connecting to a router for IP communications.
This will operate from the panel's 12V power and will stay up and running during a power outage due to the backup battery of the alarm system it is hooked to. This module uses the black, green, and yellow terminals on the DSC panel for hook up and the positive wire will land on the positive terminal of your backup battery.
The SEM300 has indicator LEDs to give you status on the connection to the Alarm.com service and also features other LEDs to let you check on the status of the broadband connection and communications status.
The ADC-SEM300-PS-VZ-M also features a Z-Wave control unit that you be able to utilize if you subscribe to the Alarm.com Residential Interactive Service and will give you the ability to create a Z-Wave network in your home for home automation devices such as lights, door locks, and thermostats.
Current Draw: 130 mA (standby) 2000 mA (alarm transmission)
Cellular Network: Verizon Dual Band 4G LTE
Z-wave frequency: 908.4MHz
Panel Interfaces: 3 wire bus connection 12V power to panel battery +
Alarm.com Module Indicators:
One module/panel communication status LED, one module power LED, one automation LED, three wireless communication status LEDs
SEM Circuit Board Indicators:
One LAN LED, one processor LED, one COMM fail LED
Operating Temperature: 32 to 120°F (0 to 49°C)
Storage Temperature: -30 to 140°F (-34 to 60°C)
Humidity: 90% relative humidity non-condensing
Enclosure Dimensions (L x W x D).............7.5 x 4.25 x 1.5” (19.05 x 11.43 x 3.81 cm)
Enclosure Color: White
Case Material: High-impact, ABS plastic
ADC SEM300 Quick Install Guide
Installation guide
Specifications Sheet
QUESTIONS & ANSWERS
Ask a Question-
I have an existing DSC 1864 security system (operational, however never used) with 13 zones: 7 wired smoke alarms; 1 smoke alarm power; 4 CO detectors; 1 Door contact. I am interested in upgrading the system with a wireless communicator from Alarm.com and monitoring by alarmsystemstore.com. I would also like to add some wireless door contacts to expand the system, as well as a motion sensor. What would you recommend? I cannot determine whether to purchase a mtbinc1@sbcglobal.net System Enhancement Module for DSC Power Series, or the DSC TL880LECVZ N Alarm.com Dual Path Communicator (Verizon LTE Ethernet). I do know that Verizon network coverage in my area is far superior to ATT. Thanks.
The SEM would be the proper module for your system. The TL880 only works with the newer DSC Neo system. See here for the SEM:
Related Products
-
{"id":1338396082220,"title":"DSC TL880LECATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet)","handle":"dsc-tl880leat-alarm-com-dual-path-communicator-att-lte-ethernet","description":"\u003ch2\u003eDSC TL880LECATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet)\u003c\/h2\u003e\n\u003cp\u003e What you'll get:\u003c\/p\u003e\n\u003cp\u003e1 - TL880LECATN Cellular Communicator\u003cbr\u003e1 - Attached antenna\u003cbr\u003e1 - PCL422 Daughterboard\u003cbr\u003e1 - PCLink cable\u003cbr\u003eInstallation hardware\u003cbr\u003eInstallation instructions\u003c\/p\u003e\n\u003cp\u003e The TL880LECATN is a 4G LTE cellular communicator that will send alarm signals and information through the AT\u0026amp;T network. The communicator also has the ability to be fully redundant because of its ability to use the internet communication path as well. The TL880LECATN will connect to a DSC NEO version 1.1 or above by way of the included PCL422 daughterboard. \u003c\/p\u003e\n\u003cp\u003eThe TL880LECATN can send alarm signals to a \u003ca title=\"Central Station Monitoring Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-monitoring\"\u003ecentral station\u003c\/a\u003e using either SIA or Contact ID reporting format. You can also use this communicator for \u003ca title=\"Alarm.com Residential Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\"\u003eAlarm.com Residential Interactive\u003c\/a\u003e or \u003ca title=\"Alarm.com Commercial Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-services\"\u003eAlarm.com Commercial Interactive\u003c\/a\u003e services. The communicator features signal strength LEDs so you will be able to determine the best placement before getting it activated. It also has troubleshooting LEDs that will help you identify even the most minute problem.\u003c\/p\u003e\n\u003cp\u003eThe TL880LECATN, like all Alarm.com, powered communicators, features a built-in Z-Wave controller that will be used in conjunction with the Residential Interactive if you have the Residential Interactive + Automation or the Residential Interactive Gold package levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Compatible with HS2016\/ HS2032\/ HS2064\/ HS2128 control panels V1.1 and higher\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Now compatible with PowerSeries Pro HS3032, HS3128 and HS3248 control panels V1.1 and higher\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e• Compatible with Sur-Gard System I-IP\/II\/III\/IV\/5 monitoring station receivers (SG-System 5 required for Visual Verification)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions - 5.875\" W × 4.5” H (150mm × 115mm)\u003cbr\u003eWeight - 0.683 lbs (310 g) (with mounting bracket)\u003cbr\u003eCurrent Draw - 150 mA\u003cbr\u003eOperating Environment - 5° to 40° C (40° to 104° F)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880_QUICK_INSTALL_GUIDE.pdf?v=1715866743\" target=\"_blank\" rel=\"noopener\"\u003eADC TL880 Quick Install Guide\u003c\/a\u003e\u003ca title=\"ADC TL880 Troubleshooting Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_TL880_Troubleshooting_Guide.pdf?v=1628872256\" target=\"_blank\"\u003e\u003cbr\u003eADC TL880 Troubleshooting Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"DSC TL880LTVZ Installation manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/DSC_NEOTL880LT-NEOTL880LE_IT_R002_29010001.pdf?5019173717107515458\" target=\"_blank\"\u003eDSC TL880LTVZ Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca title=\"DSC TL880LTVZ Specifications sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880LE-TL880LT_ds_lt_en_lr.pdf?5019173717107515458\" target=\"_blank\"\u003eDSC TL880LTVZ Specifications sheet\u003c\/a\u003e\u003c\/p\u003e","published_at":"2018-10-25T14:39:26-04:00","created_at":"2018-10-11T07:52:40-04:00","vendor":"DSC","type":"DSC Communicators","tags":["8080","880","880LE","880LEAT","880LT","880LTVZ","Alarm.com Communicators","cd8080","DSC Communicators","DSC Expansion Modules","DSC PowerSeries NEO Accessories \u0026 Expansion","IP \u0026 Cellular Alarm Communicators","TL880"],"price":28995,"price_min":28995,"price_max":28995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12340330463276,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSC-TL880LECATN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC TL880LECATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet)","public_title":null,"options":["Default Title"],"price":28995,"weight":907,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"continue","barcode":"DSC-TL880LECATN","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-896935.jpg?v=1595526125","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-294198.jpg?v=1595526125"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-896935.jpg?v=1595526125","options":["Title"],"media":[{"alt":"DSC TL880LEATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet) - AlarmSystemStore.com","id":7363120758886,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-896935.jpg?v=1595526125"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-896935.jpg?v=1595526125","width":1024},{"alt":"DSC TL880LEATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet) - AlarmSystemStore.com","id":7363120824422,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-294198.jpg?v=1595526125"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-294198.jpg?v=1595526125","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eDSC TL880LECATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet)\u003c\/h2\u003e\n\u003cp\u003e What you'll get:\u003c\/p\u003e\n\u003cp\u003e1 - TL880LECATN Cellular Communicator\u003cbr\u003e1 - Attached antenna\u003cbr\u003e1 - PCL422 Daughterboard\u003cbr\u003e1 - PCLink cable\u003cbr\u003eInstallation hardware\u003cbr\u003eInstallation instructions\u003c\/p\u003e\n\u003cp\u003e The TL880LECATN is a 4G LTE cellular communicator that will send alarm signals and information through the AT\u0026amp;T network. The communicator also has the ability to be fully redundant because of its ability to use the internet communication path as well. The TL880LECATN will connect to a DSC NEO version 1.1 or above by way of the included PCL422 daughterboard. \u003c\/p\u003e\n\u003cp\u003eThe TL880LECATN can send alarm signals to a \u003ca title=\"Central Station Monitoring Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-monitoring\"\u003ecentral station\u003c\/a\u003e using either SIA or Contact ID reporting format. You can also use this communicator for \u003ca title=\"Alarm.com Residential Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\"\u003eAlarm.com Residential Interactive\u003c\/a\u003e or \u003ca title=\"Alarm.com Commercial Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-services\"\u003eAlarm.com Commercial Interactive\u003c\/a\u003e services. The communicator features signal strength LEDs so you will be able to determine the best placement before getting it activated. It also has troubleshooting LEDs that will help you identify even the most minute problem.\u003c\/p\u003e\n\u003cp\u003eThe TL880LECATN, like all Alarm.com, powered communicators, features a built-in Z-Wave controller that will be used in conjunction with the Residential Interactive if you have the Residential Interactive + Automation or the Residential Interactive Gold package levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Compatible with HS2016\/ HS2032\/ HS2064\/ HS2128 control panels V1.1 and higher\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Now compatible with PowerSeries Pro HS3032, HS3128 and HS3248 control panels V1.1 and higher\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e• Compatible with Sur-Gard System I-IP\/II\/III\/IV\/5 monitoring station receivers (SG-System 5 required for Visual Verification)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions - 5.875\" W × 4.5” H (150mm × 115mm)\u003cbr\u003eWeight - 0.683 lbs (310 g) (with mounting bracket)\u003cbr\u003eCurrent Draw - 150 mA\u003cbr\u003eOperating Environment - 5° to 40° C (40° to 104° F)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880_QUICK_INSTALL_GUIDE.pdf?v=1715866743\" target=\"_blank\" rel=\"noopener\"\u003eADC TL880 Quick Install Guide\u003c\/a\u003e\u003ca title=\"ADC TL880 Troubleshooting Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_TL880_Troubleshooting_Guide.pdf?v=1628872256\" target=\"_blank\"\u003e\u003cbr\u003eADC TL880 Troubleshooting Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"DSC TL880LTVZ Installation manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/DSC_NEOTL880LT-NEOTL880LE_IT_R002_29010001.pdf?5019173717107515458\" target=\"_blank\"\u003eDSC TL880LTVZ Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca title=\"DSC TL880LTVZ Specifications sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880LE-TL880LT_ds_lt_en_lr.pdf?5019173717107515458\" target=\"_blank\"\u003eDSC TL880LTVZ Specifications sheet\u003c\/a\u003e\u003c\/p\u003e"}
$289.95
DSC TL880LECATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet) What you'll get: 1 - TL880LECATN Cellular Communicator1 - Attached antenna1 - PCL422 Daughterboard1 - PCLink cableInstallation hardwareInstallation instructions The TL880LECATN is a 4G LTE cellular communicator that will send alarm signals and information through the AT&T network. The communicator also has the ability to be fully redundant because of its ability to use the internet communication path as well. The TL880LECATN will connect to a DSC NEO version 1.1 or above by way of the included PCL422 daughterboard. The TL880LECATN can send alarm signals to a central station using either SIA or Contact ID reporting format. You can also use this communicator for Alarm.com Residential Interactive or Alarm.com Commercial Interactive services. The communicator features signal strength LEDs so you will be able to determine the best placement before getting it activated. It also has troubleshooting LEDs that will help you...
DSC TL880LECATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet) What you'll get: 1 - TL880LECATN Cellular Communicator1 - Attached antenna1...
-
{"id":1338396082220,"title":"DSC TL880LECATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet)","handle":"dsc-tl880leat-alarm-com-dual-path-communicator-att-lte-ethernet","description":"\u003ch2\u003eDSC TL880LECATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet)\u003c\/h2\u003e\n\u003cp\u003e What you'll get:\u003c\/p\u003e\n\u003cp\u003e1 - TL880LECATN Cellular Communicator\u003cbr\u003e1 - Attached antenna\u003cbr\u003e1 - PCL422 Daughterboard\u003cbr\u003e1 - PCLink cable\u003cbr\u003eInstallation hardware\u003cbr\u003eInstallation instructions\u003c\/p\u003e\n\u003cp\u003e The TL880LECATN is a 4G LTE cellular communicator that will send alarm signals and information through the AT\u0026amp;T network. The communicator also has the ability to be fully redundant because of its ability to use the internet communication path as well. The TL880LECATN will connect to a DSC NEO version 1.1 or above by way of the included PCL422 daughterboard. \u003c\/p\u003e\n\u003cp\u003eThe TL880LECATN can send alarm signals to a \u003ca title=\"Central Station Monitoring Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-monitoring\"\u003ecentral station\u003c\/a\u003e using either SIA or Contact ID reporting format. You can also use this communicator for \u003ca title=\"Alarm.com Residential Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\"\u003eAlarm.com Residential Interactive\u003c\/a\u003e or \u003ca title=\"Alarm.com Commercial Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-services\"\u003eAlarm.com Commercial Interactive\u003c\/a\u003e services. The communicator features signal strength LEDs so you will be able to determine the best placement before getting it activated. It also has troubleshooting LEDs that will help you identify even the most minute problem.\u003c\/p\u003e\n\u003cp\u003eThe TL880LECATN, like all Alarm.com, powered communicators, features a built-in Z-Wave controller that will be used in conjunction with the Residential Interactive if you have the Residential Interactive + Automation or the Residential Interactive Gold package levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Compatible with HS2016\/ HS2032\/ HS2064\/ HS2128 control panels V1.1 and higher\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Now compatible with PowerSeries Pro HS3032, HS3128 and HS3248 control panels V1.1 and higher\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e• Compatible with Sur-Gard System I-IP\/II\/III\/IV\/5 monitoring station receivers (SG-System 5 required for Visual Verification)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions - 5.875\" W × 4.5” H (150mm × 115mm)\u003cbr\u003eWeight - 0.683 lbs (310 g) (with mounting bracket)\u003cbr\u003eCurrent Draw - 150 mA\u003cbr\u003eOperating Environment - 5° to 40° C (40° to 104° F)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880_QUICK_INSTALL_GUIDE.pdf?v=1715866743\" target=\"_blank\" rel=\"noopener\"\u003eADC TL880 Quick Install Guide\u003c\/a\u003e\u003ca title=\"ADC TL880 Troubleshooting Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_TL880_Troubleshooting_Guide.pdf?v=1628872256\" target=\"_blank\"\u003e\u003cbr\u003eADC TL880 Troubleshooting Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"DSC TL880LTVZ Installation manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/DSC_NEOTL880LT-NEOTL880LE_IT_R002_29010001.pdf?5019173717107515458\" target=\"_blank\"\u003eDSC TL880LTVZ Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca title=\"DSC TL880LTVZ Specifications sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880LE-TL880LT_ds_lt_en_lr.pdf?5019173717107515458\" target=\"_blank\"\u003eDSC TL880LTVZ Specifications sheet\u003c\/a\u003e\u003c\/p\u003e","published_at":"2018-10-25T14:39:26-04:00","created_at":"2018-10-11T07:52:40-04:00","vendor":"DSC","type":"DSC Communicators","tags":["8080","880","880LE","880LEAT","880LT","880LTVZ","Alarm.com Communicators","cd8080","DSC Communicators","DSC Expansion Modules","DSC PowerSeries NEO Accessories \u0026 Expansion","IP \u0026 Cellular Alarm Communicators","TL880"],"price":28995,"price_min":28995,"price_max":28995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12340330463276,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSC-TL880LECATN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC TL880LECATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet)","public_title":null,"options":["Default Title"],"price":28995,"weight":907,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"continue","barcode":"DSC-TL880LECATN","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-896935.jpg?v=1595526125","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-294198.jpg?v=1595526125"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-896935.jpg?v=1595526125","options":["Title"],"media":[{"alt":"DSC TL880LEATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet) - AlarmSystemStore.com","id":7363120758886,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-896935.jpg?v=1595526125"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-896935.jpg?v=1595526125","width":1024},{"alt":"DSC TL880LEATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet) - AlarmSystemStore.com","id":7363120824422,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-294198.jpg?v=1595526125"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-294198.jpg?v=1595526125","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eDSC TL880LECATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet)\u003c\/h2\u003e\n\u003cp\u003e What you'll get:\u003c\/p\u003e\n\u003cp\u003e1 - TL880LECATN Cellular Communicator\u003cbr\u003e1 - Attached antenna\u003cbr\u003e1 - PCL422 Daughterboard\u003cbr\u003e1 - PCLink cable\u003cbr\u003eInstallation hardware\u003cbr\u003eInstallation instructions\u003c\/p\u003e\n\u003cp\u003e The TL880LECATN is a 4G LTE cellular communicator that will send alarm signals and information through the AT\u0026amp;T network. The communicator also has the ability to be fully redundant because of its ability to use the internet communication path as well. The TL880LECATN will connect to a DSC NEO version 1.1 or above by way of the included PCL422 daughterboard. \u003c\/p\u003e\n\u003cp\u003eThe TL880LECATN can send alarm signals to a \u003ca title=\"Central Station Monitoring Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-monitoring\"\u003ecentral station\u003c\/a\u003e using either SIA or Contact ID reporting format. You can also use this communicator for \u003ca title=\"Alarm.com Residential Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\"\u003eAlarm.com Residential Interactive\u003c\/a\u003e or \u003ca title=\"Alarm.com Commercial Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-services\"\u003eAlarm.com Commercial Interactive\u003c\/a\u003e services. The communicator features signal strength LEDs so you will be able to determine the best placement before getting it activated. It also has troubleshooting LEDs that will help you identify even the most minute problem.\u003c\/p\u003e\n\u003cp\u003eThe TL880LECATN, like all Alarm.com, powered communicators, features a built-in Z-Wave controller that will be used in conjunction with the Residential Interactive if you have the Residential Interactive + Automation or the Residential Interactive Gold package levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Compatible with HS2016\/ HS2032\/ HS2064\/ HS2128 control panels V1.1 and higher\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Now compatible with PowerSeries Pro HS3032, HS3128 and HS3248 control panels V1.1 and higher\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e• Compatible with Sur-Gard System I-IP\/II\/III\/IV\/5 monitoring station receivers (SG-System 5 required for Visual Verification)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions - 5.875\" W × 4.5” H (150mm × 115mm)\u003cbr\u003eWeight - 0.683 lbs (310 g) (with mounting bracket)\u003cbr\u003eCurrent Draw - 150 mA\u003cbr\u003eOperating Environment - 5° to 40° C (40° to 104° F)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880_QUICK_INSTALL_GUIDE.pdf?v=1715866743\" target=\"_blank\" rel=\"noopener\"\u003eADC TL880 Quick Install Guide\u003c\/a\u003e\u003ca title=\"ADC TL880 Troubleshooting Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_TL880_Troubleshooting_Guide.pdf?v=1628872256\" target=\"_blank\"\u003e\u003cbr\u003eADC TL880 Troubleshooting Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"DSC TL880LTVZ Installation manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/DSC_NEOTL880LT-NEOTL880LE_IT_R002_29010001.pdf?5019173717107515458\" target=\"_blank\"\u003eDSC TL880LTVZ Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca title=\"DSC TL880LTVZ Specifications sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880LE-TL880LT_ds_lt_en_lr.pdf?5019173717107515458\" target=\"_blank\"\u003eDSC TL880LTVZ Specifications sheet\u003c\/a\u003e\u003c\/p\u003e"}
-
{"id":471630282791,"title":"DSC TL880LECVZ N Alarm.com Dual Path Communicator (Verizon LTE, Ethernet)","handle":"dsc-tl880ltvz-alarm-com-dual-path-communicator-verizon-lte-ethernet","description":"\u003ch2\u003eDSC \u003cspan data-mce-fragment=\"1\"\u003eTL880LECVZ N\u003c\/span\u003e Alarm.com Dual Path Communicator (Verizon LTE, Ethernet)\u003c\/h2\u003e\n\u003cp\u003e The DSC TL880LTVZN Alarm.com Dual Path Communicator is a 4G LTE style cellular communicator that also has the ability to send signals through the internet if you connect it via ethernet cable to a router. This provides redundancy because if one path fails the other takes over. The TL880LTVZN connects to a DSC PowerSeries NEO panel via the PCL-422 module which, in turn, connects to the NEO through PCLink cable. The PCL-422 is included when you buy the TL880LTVZN.\u003c\/p\u003e\n\u003cp\u003eThe TL880LTVZN can send signals in either the SIA or Contact ID reporting formats. It also features a signal strength LED indicators so that you can get optimum placement in the install location. This unit also has troubleshooting lights so that if anything is amiss in the setup; you can read these lights to fix the situation.\u003c\/p\u003e\n\u003cp\u003eThe TL880LTVZN can be used with Alarm.com Level 1 Signal Forwarding to send signals to a central station monitoring service. You can also bump up to the Residential Interactive Service Alarm.com offers to get features such as your own notifications, remote control of the system via a smartphone app, and, with higher package levels, integrate Z-Wave home automation with these communicators built-in Z-Wave controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Compatible with HS2016\/ HS2032\/ HS2064\/ HS2128 control panels V1.1 and higher\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Now compatible with PowerSeries Pro HS3032, HS3128 and HS3248 control panels V1.1 and higher\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e• Compatible with Sur-Gard System I-IP\/II\/III\/IV\/5 monitoring station receivers (SG-System 5 required for Visual Verification)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions - 5.875\" W × 4.5” H (150mm × 115mm)\u003cbr\u003eWeight - 0.683 lbs (310 g) (with mounting bracket)\u003cbr\u003eCurrent Draw - 150 mA\u003cbr\u003eOperating Environment - 5° to 40° C (40° to 104° F)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880_QUICK_INSTALL_GUIDE.pdf?v=1715866743\" target=\"_blank\" rel=\"noopener\"\u003eADC TL880 Quick Install Guide\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_TL880_Troubleshooting_Guide.pdf?v=1628872256\" title=\"ADC TL880 Troubleshooting Guide\" target=\"_blank\"\u003e\u003cbr\u003eADC TL880 Troubleshooting Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/DSC_NEOTL880LT-NEOTL880LE_IT_R002_29010001.pdf?5019173717107515458\" title=\"DSC TL880LTVZ Installation manual\" target=\"_blank\"\u003eDSC TL880LTVZ Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880LE-TL880LT_ds_lt_en_lr.pdf?5019173717107515458\" title=\"DSC TL880LTVZ Specifications sheet\" target=\"_blank\"\u003eDSC TL880LTVZ Specifications sheet\u003c\/a\u003e\u003c\/p\u003e","published_at":"2018-01-22T15:22:56-05:00","created_at":"2018-01-22T10:11:44-05:00","vendor":"DSC","type":"DSC Communicators","tags":["8080","880","880LT","Alarm.com Communicators","cd8080","DSC Communicators","DSC Expansion Modules","DSC PowerSeries NEO Accessories \u0026 Expansion","IP \u0026 Cellular Alarm Communicators","TL880"],"price":28995,"price_min":28995,"price_max":28995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6641358438439,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSC-TL880LECVZN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC TL880LECVZ N Alarm.com Dual Path Communicator (Verizon LTE, Ethernet)","public_title":null,"options":["Default Title"],"price":28995,"weight":907,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"continue","barcode":"DSC-TL880LECVZN","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-417690.jpg?v=1595526133","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-857222.jpg?v=1595526133"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-417690.jpg?v=1595526133","options":["Title"],"media":[{"alt":"DSC TL880LTVZN Alarm.com Dual Path Communicator (Verizon LTE, Ethernet) - AlarmSystemStore.com","id":7363124625510,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-417690.jpg?v=1595526133"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-417690.jpg?v=1595526133","width":1024},{"alt":"DSC TL880LTVZN Alarm.com Dual Path Communicator (Verizon LTE, Ethernet) - AlarmSystemStore.com","id":7363124658278,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-857222.jpg?v=1595526133"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-857222.jpg?v=1595526133","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eDSC \u003cspan data-mce-fragment=\"1\"\u003eTL880LECVZ N\u003c\/span\u003e Alarm.com Dual Path Communicator (Verizon LTE, Ethernet)\u003c\/h2\u003e\n\u003cp\u003e The DSC TL880LTVZN Alarm.com Dual Path Communicator is a 4G LTE style cellular communicator that also has the ability to send signals through the internet if you connect it via ethernet cable to a router. This provides redundancy because if one path fails the other takes over. The TL880LTVZN connects to a DSC PowerSeries NEO panel via the PCL-422 module which, in turn, connects to the NEO through PCLink cable. The PCL-422 is included when you buy the TL880LTVZN.\u003c\/p\u003e\n\u003cp\u003eThe TL880LTVZN can send signals in either the SIA or Contact ID reporting formats. It also features a signal strength LED indicators so that you can get optimum placement in the install location. This unit also has troubleshooting lights so that if anything is amiss in the setup; you can read these lights to fix the situation.\u003c\/p\u003e\n\u003cp\u003eThe TL880LTVZN can be used with Alarm.com Level 1 Signal Forwarding to send signals to a central station monitoring service. You can also bump up to the Residential Interactive Service Alarm.com offers to get features such as your own notifications, remote control of the system via a smartphone app, and, with higher package levels, integrate Z-Wave home automation with these communicators built-in Z-Wave controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Compatible with HS2016\/ HS2032\/ HS2064\/ HS2128 control panels V1.1 and higher\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Now compatible with PowerSeries Pro HS3032, HS3128 and HS3248 control panels V1.1 and higher\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e• Compatible with Sur-Gard System I-IP\/II\/III\/IV\/5 monitoring station receivers (SG-System 5 required for Visual Verification)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions - 5.875\" W × 4.5” H (150mm × 115mm)\u003cbr\u003eWeight - 0.683 lbs (310 g) (with mounting bracket)\u003cbr\u003eCurrent Draw - 150 mA\u003cbr\u003eOperating Environment - 5° to 40° C (40° to 104° F)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880_QUICK_INSTALL_GUIDE.pdf?v=1715866743\" target=\"_blank\" rel=\"noopener\"\u003eADC TL880 Quick Install Guide\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_TL880_Troubleshooting_Guide.pdf?v=1628872256\" title=\"ADC TL880 Troubleshooting Guide\" target=\"_blank\"\u003e\u003cbr\u003eADC TL880 Troubleshooting Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/DSC_NEOTL880LT-NEOTL880LE_IT_R002_29010001.pdf?5019173717107515458\" title=\"DSC TL880LTVZ Installation manual\" target=\"_blank\"\u003eDSC TL880LTVZ Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880LE-TL880LT_ds_lt_en_lr.pdf?5019173717107515458\" title=\"DSC TL880LTVZ Specifications sheet\" target=\"_blank\"\u003eDSC TL880LTVZ Specifications sheet\u003c\/a\u003e\u003c\/p\u003e"}
$289.95
DSC TL880LECVZ N Alarm.com Dual Path Communicator (Verizon LTE, Ethernet) The DSC TL880LTVZN Alarm.com Dual Path Communicator is a 4G LTE style cellular communicator that also has the ability to send signals through the internet if you connect it via ethernet cable to a router. This provides redundancy because if one path fails the other takes over. The TL880LTVZN connects to a DSC PowerSeries NEO panel via the PCL-422 module which, in turn, connects to the NEO through PCLink cable. The PCL-422 is included when you buy the TL880LTVZN. The TL880LTVZN can send signals in either the SIA or Contact ID reporting formats. It also features a signal strength LED indicators so that you can get optimum placement in the install location. This unit also has troubleshooting lights so that if anything is amiss in the setup; you can read these lights to fix the situation. The TL880LTVZN can be...
DSC TL880LECVZ N Alarm.com Dual Path Communicator (Verizon LTE, Ethernet) The DSC TL880LTVZN Alarm.com Dual Path Communicator is a 4G...
-
{"id":471630282791,"title":"DSC TL880LECVZ N Alarm.com Dual Path Communicator (Verizon LTE, Ethernet)","handle":"dsc-tl880ltvz-alarm-com-dual-path-communicator-verizon-lte-ethernet","description":"\u003ch2\u003eDSC \u003cspan data-mce-fragment=\"1\"\u003eTL880LECVZ N\u003c\/span\u003e Alarm.com Dual Path Communicator (Verizon LTE, Ethernet)\u003c\/h2\u003e\n\u003cp\u003e The DSC TL880LTVZN Alarm.com Dual Path Communicator is a 4G LTE style cellular communicator that also has the ability to send signals through the internet if you connect it via ethernet cable to a router. This provides redundancy because if one path fails the other takes over. The TL880LTVZN connects to a DSC PowerSeries NEO panel via the PCL-422 module which, in turn, connects to the NEO through PCLink cable. The PCL-422 is included when you buy the TL880LTVZN.\u003c\/p\u003e\n\u003cp\u003eThe TL880LTVZN can send signals in either the SIA or Contact ID reporting formats. It also features a signal strength LED indicators so that you can get optimum placement in the install location. This unit also has troubleshooting lights so that if anything is amiss in the setup; you can read these lights to fix the situation.\u003c\/p\u003e\n\u003cp\u003eThe TL880LTVZN can be used with Alarm.com Level 1 Signal Forwarding to send signals to a central station monitoring service. You can also bump up to the Residential Interactive Service Alarm.com offers to get features such as your own notifications, remote control of the system via a smartphone app, and, with higher package levels, integrate Z-Wave home automation with these communicators built-in Z-Wave controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Compatible with HS2016\/ HS2032\/ HS2064\/ HS2128 control panels V1.1 and higher\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Now compatible with PowerSeries Pro HS3032, HS3128 and HS3248 control panels V1.1 and higher\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e• Compatible with Sur-Gard System I-IP\/II\/III\/IV\/5 monitoring station receivers (SG-System 5 required for Visual Verification)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions - 5.875\" W × 4.5” H (150mm × 115mm)\u003cbr\u003eWeight - 0.683 lbs (310 g) (with mounting bracket)\u003cbr\u003eCurrent Draw - 150 mA\u003cbr\u003eOperating Environment - 5° to 40° C (40° to 104° F)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880_QUICK_INSTALL_GUIDE.pdf?v=1715866743\" target=\"_blank\" rel=\"noopener\"\u003eADC TL880 Quick Install Guide\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_TL880_Troubleshooting_Guide.pdf?v=1628872256\" title=\"ADC TL880 Troubleshooting Guide\" target=\"_blank\"\u003e\u003cbr\u003eADC TL880 Troubleshooting Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/DSC_NEOTL880LT-NEOTL880LE_IT_R002_29010001.pdf?5019173717107515458\" title=\"DSC TL880LTVZ Installation manual\" target=\"_blank\"\u003eDSC TL880LTVZ Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880LE-TL880LT_ds_lt_en_lr.pdf?5019173717107515458\" title=\"DSC TL880LTVZ Specifications sheet\" target=\"_blank\"\u003eDSC TL880LTVZ Specifications sheet\u003c\/a\u003e\u003c\/p\u003e","published_at":"2018-01-22T15:22:56-05:00","created_at":"2018-01-22T10:11:44-05:00","vendor":"DSC","type":"DSC Communicators","tags":["8080","880","880LT","Alarm.com Communicators","cd8080","DSC Communicators","DSC Expansion Modules","DSC PowerSeries NEO Accessories \u0026 Expansion","IP \u0026 Cellular Alarm Communicators","TL880"],"price":28995,"price_min":28995,"price_max":28995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6641358438439,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSC-TL880LECVZN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC TL880LECVZ N Alarm.com Dual Path Communicator (Verizon LTE, Ethernet)","public_title":null,"options":["Default Title"],"price":28995,"weight":907,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"continue","barcode":"DSC-TL880LECVZN","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-417690.jpg?v=1595526133","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-857222.jpg?v=1595526133"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-417690.jpg?v=1595526133","options":["Title"],"media":[{"alt":"DSC TL880LTVZN Alarm.com Dual Path Communicator (Verizon LTE, Ethernet) - AlarmSystemStore.com","id":7363124625510,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-417690.jpg?v=1595526133"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-417690.jpg?v=1595526133","width":1024},{"alt":"DSC TL880LTVZN Alarm.com Dual Path Communicator (Verizon LTE, Ethernet) - AlarmSystemStore.com","id":7363124658278,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-857222.jpg?v=1595526133"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-857222.jpg?v=1595526133","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eDSC \u003cspan data-mce-fragment=\"1\"\u003eTL880LECVZ N\u003c\/span\u003e Alarm.com Dual Path Communicator (Verizon LTE, Ethernet)\u003c\/h2\u003e\n\u003cp\u003e The DSC TL880LTVZN Alarm.com Dual Path Communicator is a 4G LTE style cellular communicator that also has the ability to send signals through the internet if you connect it via ethernet cable to a router. This provides redundancy because if one path fails the other takes over. The TL880LTVZN connects to a DSC PowerSeries NEO panel via the PCL-422 module which, in turn, connects to the NEO through PCLink cable. The PCL-422 is included when you buy the TL880LTVZN.\u003c\/p\u003e\n\u003cp\u003eThe TL880LTVZN can send signals in either the SIA or Contact ID reporting formats. It also features a signal strength LED indicators so that you can get optimum placement in the install location. This unit also has troubleshooting lights so that if anything is amiss in the setup; you can read these lights to fix the situation.\u003c\/p\u003e\n\u003cp\u003eThe TL880LTVZN can be used with Alarm.com Level 1 Signal Forwarding to send signals to a central station monitoring service. You can also bump up to the Residential Interactive Service Alarm.com offers to get features such as your own notifications, remote control of the system via a smartphone app, and, with higher package levels, integrate Z-Wave home automation with these communicators built-in Z-Wave controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Compatible with HS2016\/ HS2032\/ HS2064\/ HS2128 control panels V1.1 and higher\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Now compatible with PowerSeries Pro HS3032, HS3128 and HS3248 control panels V1.1 and higher\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e• Compatible with Sur-Gard System I-IP\/II\/III\/IV\/5 monitoring station receivers (SG-System 5 required for Visual Verification)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions - 5.875\" W × 4.5” H (150mm × 115mm)\u003cbr\u003eWeight - 0.683 lbs (310 g) (with mounting bracket)\u003cbr\u003eCurrent Draw - 150 mA\u003cbr\u003eOperating Environment - 5° to 40° C (40° to 104° F)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880_QUICK_INSTALL_GUIDE.pdf?v=1715866743\" target=\"_blank\" rel=\"noopener\"\u003eADC TL880 Quick Install Guide\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_TL880_Troubleshooting_Guide.pdf?v=1628872256\" title=\"ADC TL880 Troubleshooting Guide\" target=\"_blank\"\u003e\u003cbr\u003eADC TL880 Troubleshooting Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/DSC_NEOTL880LT-NEOTL880LE_IT_R002_29010001.pdf?5019173717107515458\" title=\"DSC TL880LTVZ Installation manual\" target=\"_blank\"\u003eDSC TL880LTVZ Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880LE-TL880LT_ds_lt_en_lr.pdf?5019173717107515458\" title=\"DSC TL880LTVZ Specifications sheet\" target=\"_blank\"\u003eDSC TL880LTVZ Specifications sheet\u003c\/a\u003e\u003c\/p\u003e"}
-
{"id":469353529383,"title":"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026T)","handle":"adc-sem210-ps-at-system-enhancement-module-for-dsc-powerseries","description":"\u003cp class=\"product-excerpt\"\u003eThe SEM300-PS-AT-M is an update to the previous SEM 210 model. The SEM300-PS-AT-M is an LTE cellular and internet communicator from Alarm.com for the DSC PC1616, PC1832, and PC1864. The SEM300 provides dual-path communication to your system for Alarm.com service plans. Also includes a z-wave hub for automation service packages. This model runs on AT\u0026amp;T signaling.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026amp;T)\u003c\/h2\u003e\n\u003ch4\u003eWhat you'll get:\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e1 - ADC-SEM300-PS-AT-M\u003cbr\u003e1 - Antenna\u003cbr\u003e1 - Red power wire for battery connection\u003cbr\u003e3 - Screws\u003cbr\u003e3 - Wall anchors\u003c\/p\u003e\n\u003cp\u003eThe ADC-SEM300-PS-AT is a dual path AT\u0026amp;T LTE cellular and Broadband internet communicator for DSC PC1616, PC1832, and PC1864 alarm systems that are version 4.2 or higher. This will send signal over the 4G AT\u0026amp;T LTE Network and has an optional hookup, via ethernet cable, for connecting to a router for IP communications.\u003c\/p\u003e\n\u003cp\u003eThis will operate from the panel's 12V power and will stay up and running during a power outage due to the backup battery of the alarm system it is hooked to. This module uses the black, green, and yellow terminals on the DSC panel for hook up and the positive wire will land on the positive terminal of your backup battery.\u003c\/p\u003e\n\u003cp\u003eThe SEM300 has indicator LEDs to give you status on the connection to the Alarm.com service and also features other LEDs to let you check on the status of the broadband connection and communications status.\u003c\/p\u003e\n\u003cp\u003e The ADC-SEM300-PS-AT also features a Z-Wave control unit that you be able to utilize if you subscribe to the \u003ca title=\"Alarm.com Residential Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\"\u003eAlarm.com Residential Interactive Service\u003c\/a\u003e and will give you the ability to create a Z-Wave network in your home for \u003ca title=\"Z-WAVE HOME AUTOMATION DEVICES\" href=\"https:\/\/www.alarmsystemstore.com\/collections\/z-wave-home-automation-devices\"\u003ehome automation devices\u003c\/a\u003e such as lights, door locks, and thermostats.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure Dimensions (L x W x D): 7.5 x 4.25 x 1.5 in. (19.05 x 11.43 x 3.81 cm)\u003c\/li\u003e\n\u003cli\u003eEnclosure Color: White\u003c\/li\u003e\n\u003cli\u003eCase Material: High-impact, ABS plastic\u003c\/li\u003e\n\u003cli\u003eCompatibility: DSC PowerSeries PC1616, PC1832, and PC1864 version 4.2 or newer\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 12 V nominal, 130 mA (continuous) 2000 mA (instantaneous peaks) maximum (from panel battery)\u003c\/li\u003e\n\u003cli\u003eCellular Network: AT\u0026amp;T Dual Band 4G LTE\u003c\/li\u003e\n\u003cli\u003ePanel Interfaces: Three keypad bus connections 12V power and ground to panel battery\u003c\/li\u003e\n\u003cli\u003eAlarm.com Module Indicators: One module\/panel communication status LED, one module power LED, one automation LED, three wireless communication status LEDs\u003c\/li\u003e\n\u003cli\u003eSEM Circuit Board Indicators: One LAN LED, one processor LED, one COMM fail LED\u003c\/li\u003e\n\u003cli\u003eZ-Wave Frequency: 908.4 MHz\u003c\/li\u003e\n\u003cli\u003eOperation temperature: 32° - 120° F (0°C - 49°C)\u003c\/li\u003e\n\u003cli\u003eStorage temperature: -30° - 140° F (-34°C - 60°C)\u003c\/li\u003e\n\u003cli\u003eHumidity: 90% relative humidity, non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide_a40e36c0-7a99-40ec-8984-4bfdffb9881e.pdf?v=1715973322\" target=\"_blank\" title=\"ADC Sem 300 DSC install guide\" rel=\"noopener\"\u003eADC SEM300-PS Quick Install Guide\u003c\/a\u003e\u003ca title=\"ADC Sem 300 DSC install guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide.pdf?v=1664562394\" rel=\"noopener noreferrer\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide.pdf?v=1664562394\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM210_Quick_Install_Guide.pdf?v=1628872187\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/SEM-DSC_PowerSeries_Dual-Path_SEM300_-_Installation_Guide.pdf?v=1694618748\" title=\"Alarm.com ADC-SEM300-PS-VZ Installation manual\" target=\"_blank\"\u003eInstallation guide\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/SEM-DSC_PowerSeries_Dual-Path_SEM300_-_Data_Sheet.pdf?v=1694618746\" title=\"ADC-SEM300-PS-VZ Specifications Sheet\" target=\"_blank\"\u003eSpecifications Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2018-04-03T15:04:08-04:00","created_at":"2018-01-18T13:04:14-05:00","vendor":"Alarm.com","type":"Alarm.com Communicators","tags":["ADC-SEM300-PS-AT-M","alarm.com","DSC Accessories \u0026 Expansion Modules","dsc alarm.com","DSC SEM","DSC Sem 300","dscsem","IP \u0026 Cellular Alarm Communicators","sem","sem 110","SEM 210","sem110","SEM210"],"price":20895,"price_min":20895,"price_max":20895,"available":true,"price_varies":false,"compare_at_price":23895,"compare_at_price_min":23895,"compare_at_price_max":23895,"compare_at_price_varies":false,"variants":[{"id":6598096060455,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ADC-SEM300-PS-AT-M","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026T)","public_title":null,"options":["Default Title"],"price":20895,"weight":907,"compare_at_price":23895,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"continue","barcode":"ADC-SEM300-PS-AT-M","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-797919.jpg?v=1694656638","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-146259.jpg?v=1694656638","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-928567.jpg?v=1694656638","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-287113.jpg?v=1694656638"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-797919.jpg?v=1694656638","options":["Title"],"media":[{"alt":"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026T) - AlarmSystemStore.com","id":34990909817152,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-797919.jpg?v=1694656638"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-797919.jpg?v=1694656638","width":1600},{"alt":"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026T) - AlarmSystemStore.com","id":34990909948224,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-146259.jpg?v=1694656638"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-146259.jpg?v=1694656638","width":1600},{"alt":"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026T) - AlarmSystemStore.com","id":34990910046528,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-928567.jpg?v=1694656638"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-928567.jpg?v=1694656638","width":1600},{"alt":"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026T) - AlarmSystemStore.com","id":34990910112064,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-287113.jpg?v=1694656638"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-287113.jpg?v=1694656638","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"product-excerpt\"\u003eThe SEM300-PS-AT-M is an update to the previous SEM 210 model. The SEM300-PS-AT-M is an LTE cellular and internet communicator from Alarm.com for the DSC PC1616, PC1832, and PC1864. The SEM300 provides dual-path communication to your system for Alarm.com service plans. Also includes a z-wave hub for automation service packages. This model runs on AT\u0026amp;T signaling.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026amp;T)\u003c\/h2\u003e\n\u003ch4\u003eWhat you'll get:\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e1 - ADC-SEM300-PS-AT-M\u003cbr\u003e1 - Antenna\u003cbr\u003e1 - Red power wire for battery connection\u003cbr\u003e3 - Screws\u003cbr\u003e3 - Wall anchors\u003c\/p\u003e\n\u003cp\u003eThe ADC-SEM300-PS-AT is a dual path AT\u0026amp;T LTE cellular and Broadband internet communicator for DSC PC1616, PC1832, and PC1864 alarm systems that are version 4.2 or higher. This will send signal over the 4G AT\u0026amp;T LTE Network and has an optional hookup, via ethernet cable, for connecting to a router for IP communications.\u003c\/p\u003e\n\u003cp\u003eThis will operate from the panel's 12V power and will stay up and running during a power outage due to the backup battery of the alarm system it is hooked to. This module uses the black, green, and yellow terminals on the DSC panel for hook up and the positive wire will land on the positive terminal of your backup battery.\u003c\/p\u003e\n\u003cp\u003eThe SEM300 has indicator LEDs to give you status on the connection to the Alarm.com service and also features other LEDs to let you check on the status of the broadband connection and communications status.\u003c\/p\u003e\n\u003cp\u003e The ADC-SEM300-PS-AT also features a Z-Wave control unit that you be able to utilize if you subscribe to the \u003ca title=\"Alarm.com Residential Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\"\u003eAlarm.com Residential Interactive Service\u003c\/a\u003e and will give you the ability to create a Z-Wave network in your home for \u003ca title=\"Z-WAVE HOME AUTOMATION DEVICES\" href=\"https:\/\/www.alarmsystemstore.com\/collections\/z-wave-home-automation-devices\"\u003ehome automation devices\u003c\/a\u003e such as lights, door locks, and thermostats.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure Dimensions (L x W x D): 7.5 x 4.25 x 1.5 in. (19.05 x 11.43 x 3.81 cm)\u003c\/li\u003e\n\u003cli\u003eEnclosure Color: White\u003c\/li\u003e\n\u003cli\u003eCase Material: High-impact, ABS plastic\u003c\/li\u003e\n\u003cli\u003eCompatibility: DSC PowerSeries PC1616, PC1832, and PC1864 version 4.2 or newer\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 12 V nominal, 130 mA (continuous) 2000 mA (instantaneous peaks) maximum (from panel battery)\u003c\/li\u003e\n\u003cli\u003eCellular Network: AT\u0026amp;T Dual Band 4G LTE\u003c\/li\u003e\n\u003cli\u003ePanel Interfaces: Three keypad bus connections 12V power and ground to panel battery\u003c\/li\u003e\n\u003cli\u003eAlarm.com Module Indicators: One module\/panel communication status LED, one module power LED, one automation LED, three wireless communication status LEDs\u003c\/li\u003e\n\u003cli\u003eSEM Circuit Board Indicators: One LAN LED, one processor LED, one COMM fail LED\u003c\/li\u003e\n\u003cli\u003eZ-Wave Frequency: 908.4 MHz\u003c\/li\u003e\n\u003cli\u003eOperation temperature: 32° - 120° F (0°C - 49°C)\u003c\/li\u003e\n\u003cli\u003eStorage temperature: -30° - 140° F (-34°C - 60°C)\u003c\/li\u003e\n\u003cli\u003eHumidity: 90% relative humidity, non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide_a40e36c0-7a99-40ec-8984-4bfdffb9881e.pdf?v=1715973322\" target=\"_blank\" title=\"ADC Sem 300 DSC install guide\" rel=\"noopener\"\u003eADC SEM300-PS Quick Install Guide\u003c\/a\u003e\u003ca title=\"ADC Sem 300 DSC install guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide.pdf?v=1664562394\" rel=\"noopener noreferrer\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide.pdf?v=1664562394\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM210_Quick_Install_Guide.pdf?v=1628872187\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/SEM-DSC_PowerSeries_Dual-Path_SEM300_-_Installation_Guide.pdf?v=1694618748\" title=\"Alarm.com ADC-SEM300-PS-VZ Installation manual\" target=\"_blank\"\u003eInstallation guide\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/SEM-DSC_PowerSeries_Dual-Path_SEM300_-_Data_Sheet.pdf?v=1694618746\" title=\"ADC-SEM300-PS-VZ Specifications Sheet\" target=\"_blank\"\u003eSpecifications Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
$208.95
$238.95
The SEM300-PS-AT-M is an update to the previous SEM 210 model. The SEM300-PS-AT-M is an LTE cellular and internet communicator from Alarm.com for the DSC PC1616, PC1832, and PC1864. The SEM300 provides dual-path communication to your system for Alarm.com service plans. Also includes a z-wave hub for automation service packages. This model runs on AT&T signaling. ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT&T) What you'll get: 1 - ADC-SEM300-PS-AT-M1 - Antenna1 - Red power wire for battery connection3 - Screws3 - Wall anchors The ADC-SEM300-PS-AT is a dual path AT&T LTE cellular and Broadband internet communicator for DSC PC1616, PC1832, and PC1864 alarm systems that are version 4.2 or higher. This will send signal over the 4G AT&T LTE Network and has an optional hookup, via ethernet cable, for connecting to a router for IP communications. This will operate from the panel's 12V power and will stay up and running during a...
The SEM300-PS-AT-M is an update to the previous SEM 210 model. The SEM300-PS-AT-M is an LTE cellular and internet communicator...
-
{"id":469353529383,"title":"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026T)","handle":"adc-sem210-ps-at-system-enhancement-module-for-dsc-powerseries","description":"\u003cp class=\"product-excerpt\"\u003eThe SEM300-PS-AT-M is an update to the previous SEM 210 model. The SEM300-PS-AT-M is an LTE cellular and internet communicator from Alarm.com for the DSC PC1616, PC1832, and PC1864. The SEM300 provides dual-path communication to your system for Alarm.com service plans. Also includes a z-wave hub for automation service packages. This model runs on AT\u0026amp;T signaling.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026amp;T)\u003c\/h2\u003e\n\u003ch4\u003eWhat you'll get:\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e1 - ADC-SEM300-PS-AT-M\u003cbr\u003e1 - Antenna\u003cbr\u003e1 - Red power wire for battery connection\u003cbr\u003e3 - Screws\u003cbr\u003e3 - Wall anchors\u003c\/p\u003e\n\u003cp\u003eThe ADC-SEM300-PS-AT is a dual path AT\u0026amp;T LTE cellular and Broadband internet communicator for DSC PC1616, PC1832, and PC1864 alarm systems that are version 4.2 or higher. This will send signal over the 4G AT\u0026amp;T LTE Network and has an optional hookup, via ethernet cable, for connecting to a router for IP communications.\u003c\/p\u003e\n\u003cp\u003eThis will operate from the panel's 12V power and will stay up and running during a power outage due to the backup battery of the alarm system it is hooked to. This module uses the black, green, and yellow terminals on the DSC panel for hook up and the positive wire will land on the positive terminal of your backup battery.\u003c\/p\u003e\n\u003cp\u003eThe SEM300 has indicator LEDs to give you status on the connection to the Alarm.com service and also features other LEDs to let you check on the status of the broadband connection and communications status.\u003c\/p\u003e\n\u003cp\u003e The ADC-SEM300-PS-AT also features a Z-Wave control unit that you be able to utilize if you subscribe to the \u003ca title=\"Alarm.com Residential Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\"\u003eAlarm.com Residential Interactive Service\u003c\/a\u003e and will give you the ability to create a Z-Wave network in your home for \u003ca title=\"Z-WAVE HOME AUTOMATION DEVICES\" href=\"https:\/\/www.alarmsystemstore.com\/collections\/z-wave-home-automation-devices\"\u003ehome automation devices\u003c\/a\u003e such as lights, door locks, and thermostats.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure Dimensions (L x W x D): 7.5 x 4.25 x 1.5 in. (19.05 x 11.43 x 3.81 cm)\u003c\/li\u003e\n\u003cli\u003eEnclosure Color: White\u003c\/li\u003e\n\u003cli\u003eCase Material: High-impact, ABS plastic\u003c\/li\u003e\n\u003cli\u003eCompatibility: DSC PowerSeries PC1616, PC1832, and PC1864 version 4.2 or newer\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 12 V nominal, 130 mA (continuous) 2000 mA (instantaneous peaks) maximum (from panel battery)\u003c\/li\u003e\n\u003cli\u003eCellular Network: AT\u0026amp;T Dual Band 4G LTE\u003c\/li\u003e\n\u003cli\u003ePanel Interfaces: Three keypad bus connections 12V power and ground to panel battery\u003c\/li\u003e\n\u003cli\u003eAlarm.com Module Indicators: One module\/panel communication status LED, one module power LED, one automation LED, three wireless communication status LEDs\u003c\/li\u003e\n\u003cli\u003eSEM Circuit Board Indicators: One LAN LED, one processor LED, one COMM fail LED\u003c\/li\u003e\n\u003cli\u003eZ-Wave Frequency: 908.4 MHz\u003c\/li\u003e\n\u003cli\u003eOperation temperature: 32° - 120° F (0°C - 49°C)\u003c\/li\u003e\n\u003cli\u003eStorage temperature: -30° - 140° F (-34°C - 60°C)\u003c\/li\u003e\n\u003cli\u003eHumidity: 90% relative humidity, non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide_a40e36c0-7a99-40ec-8984-4bfdffb9881e.pdf?v=1715973322\" target=\"_blank\" title=\"ADC Sem 300 DSC install guide\" rel=\"noopener\"\u003eADC SEM300-PS Quick Install Guide\u003c\/a\u003e\u003ca title=\"ADC Sem 300 DSC install guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide.pdf?v=1664562394\" rel=\"noopener noreferrer\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide.pdf?v=1664562394\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM210_Quick_Install_Guide.pdf?v=1628872187\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/SEM-DSC_PowerSeries_Dual-Path_SEM300_-_Installation_Guide.pdf?v=1694618748\" title=\"Alarm.com ADC-SEM300-PS-VZ Installation manual\" target=\"_blank\"\u003eInstallation guide\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/SEM-DSC_PowerSeries_Dual-Path_SEM300_-_Data_Sheet.pdf?v=1694618746\" title=\"ADC-SEM300-PS-VZ Specifications Sheet\" target=\"_blank\"\u003eSpecifications Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2018-04-03T15:04:08-04:00","created_at":"2018-01-18T13:04:14-05:00","vendor":"Alarm.com","type":"Alarm.com Communicators","tags":["ADC-SEM300-PS-AT-M","alarm.com","DSC Accessories \u0026 Expansion Modules","dsc alarm.com","DSC SEM","DSC Sem 300","dscsem","IP \u0026 Cellular Alarm Communicators","sem","sem 110","SEM 210","sem110","SEM210"],"price":20895,"price_min":20895,"price_max":20895,"available":true,"price_varies":false,"compare_at_price":23895,"compare_at_price_min":23895,"compare_at_price_max":23895,"compare_at_price_varies":false,"variants":[{"id":6598096060455,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ADC-SEM300-PS-AT-M","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026T)","public_title":null,"options":["Default Title"],"price":20895,"weight":907,"compare_at_price":23895,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"continue","barcode":"ADC-SEM300-PS-AT-M","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-797919.jpg?v=1694656638","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-146259.jpg?v=1694656638","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-928567.jpg?v=1694656638","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-287113.jpg?v=1694656638"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-797919.jpg?v=1694656638","options":["Title"],"media":[{"alt":"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026T) - AlarmSystemStore.com","id":34990909817152,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-797919.jpg?v=1694656638"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-797919.jpg?v=1694656638","width":1600},{"alt":"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026T) - AlarmSystemStore.com","id":34990909948224,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-146259.jpg?v=1694656638"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-146259.jpg?v=1694656638","width":1600},{"alt":"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026T) - AlarmSystemStore.com","id":34990910046528,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-928567.jpg?v=1694656638"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-928567.jpg?v=1694656638","width":1600},{"alt":"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026T) - AlarmSystemStore.com","id":34990910112064,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-287113.jpg?v=1694656638"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-287113.jpg?v=1694656638","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"product-excerpt\"\u003eThe SEM300-PS-AT-M is an update to the previous SEM 210 model. The SEM300-PS-AT-M is an LTE cellular and internet communicator from Alarm.com for the DSC PC1616, PC1832, and PC1864. The SEM300 provides dual-path communication to your system for Alarm.com service plans. Also includes a z-wave hub for automation service packages. This model runs on AT\u0026amp;T signaling.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026amp;T)\u003c\/h2\u003e\n\u003ch4\u003eWhat you'll get:\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e1 - ADC-SEM300-PS-AT-M\u003cbr\u003e1 - Antenna\u003cbr\u003e1 - Red power wire for battery connection\u003cbr\u003e3 - Screws\u003cbr\u003e3 - Wall anchors\u003c\/p\u003e\n\u003cp\u003eThe ADC-SEM300-PS-AT is a dual path AT\u0026amp;T LTE cellular and Broadband internet communicator for DSC PC1616, PC1832, and PC1864 alarm systems that are version 4.2 or higher. This will send signal over the 4G AT\u0026amp;T LTE Network and has an optional hookup, via ethernet cable, for connecting to a router for IP communications.\u003c\/p\u003e\n\u003cp\u003eThis will operate from the panel's 12V power and will stay up and running during a power outage due to the backup battery of the alarm system it is hooked to. This module uses the black, green, and yellow terminals on the DSC panel for hook up and the positive wire will land on the positive terminal of your backup battery.\u003c\/p\u003e\n\u003cp\u003eThe SEM300 has indicator LEDs to give you status on the connection to the Alarm.com service and also features other LEDs to let you check on the status of the broadband connection and communications status.\u003c\/p\u003e\n\u003cp\u003e The ADC-SEM300-PS-AT also features a Z-Wave control unit that you be able to utilize if you subscribe to the \u003ca title=\"Alarm.com Residential Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\"\u003eAlarm.com Residential Interactive Service\u003c\/a\u003e and will give you the ability to create a Z-Wave network in your home for \u003ca title=\"Z-WAVE HOME AUTOMATION DEVICES\" href=\"https:\/\/www.alarmsystemstore.com\/collections\/z-wave-home-automation-devices\"\u003ehome automation devices\u003c\/a\u003e such as lights, door locks, and thermostats.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure Dimensions (L x W x D): 7.5 x 4.25 x 1.5 in. (19.05 x 11.43 x 3.81 cm)\u003c\/li\u003e\n\u003cli\u003eEnclosure Color: White\u003c\/li\u003e\n\u003cli\u003eCase Material: High-impact, ABS plastic\u003c\/li\u003e\n\u003cli\u003eCompatibility: DSC PowerSeries PC1616, PC1832, and PC1864 version 4.2 or newer\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 12 V nominal, 130 mA (continuous) 2000 mA (instantaneous peaks) maximum (from panel battery)\u003c\/li\u003e\n\u003cli\u003eCellular Network: AT\u0026amp;T Dual Band 4G LTE\u003c\/li\u003e\n\u003cli\u003ePanel Interfaces: Three keypad bus connections 12V power and ground to panel battery\u003c\/li\u003e\n\u003cli\u003eAlarm.com Module Indicators: One module\/panel communication status LED, one module power LED, one automation LED, three wireless communication status LEDs\u003c\/li\u003e\n\u003cli\u003eSEM Circuit Board Indicators: One LAN LED, one processor LED, one COMM fail LED\u003c\/li\u003e\n\u003cli\u003eZ-Wave Frequency: 908.4 MHz\u003c\/li\u003e\n\u003cli\u003eOperation temperature: 32° - 120° F (0°C - 49°C)\u003c\/li\u003e\n\u003cli\u003eStorage temperature: -30° - 140° F (-34°C - 60°C)\u003c\/li\u003e\n\u003cli\u003eHumidity: 90% relative humidity, non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide_a40e36c0-7a99-40ec-8984-4bfdffb9881e.pdf?v=1715973322\" target=\"_blank\" title=\"ADC Sem 300 DSC install guide\" rel=\"noopener\"\u003eADC SEM300-PS Quick Install Guide\u003c\/a\u003e\u003ca title=\"ADC Sem 300 DSC install guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide.pdf?v=1664562394\" rel=\"noopener noreferrer\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide.pdf?v=1664562394\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM210_Quick_Install_Guide.pdf?v=1628872187\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/SEM-DSC_PowerSeries_Dual-Path_SEM300_-_Installation_Guide.pdf?v=1694618748\" title=\"Alarm.com ADC-SEM300-PS-VZ Installation manual\" target=\"_blank\"\u003eInstallation guide\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/SEM-DSC_PowerSeries_Dual-Path_SEM300_-_Data_Sheet.pdf?v=1694618746\" title=\"ADC-SEM300-PS-VZ Specifications Sheet\" target=\"_blank\"\u003eSpecifications Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e"}